Unhook for lure and wobbler

The loss of your favorite spinning lures for anglers often becomes a real tragedy. And to the fore, it's not even the price of the bait, although this is very important for wobblers, as much as the fact of loss of bait, which regularly brought fish and gave confidence in the correctness of catching.

You can certainly go on the way of replacing the winding rings on tees, on pieces of fishing line, which will break on the hooks. But such tricks, quite often, affect the game wobblers. There is only one thing left - use a special unhook for the spinner and wobblers.

There are several types of hooks. It is much easier to use this device when fishing from a boat and is much more difficult when fishing from the shore. All traps can be divided into two categories: working, on the principle of a bump stop and working on the principle of a cat.

Fences working on the principle of a bump, have a large weight and are used when fishing from a boat. Such a unhook has a cylindrical shape and consists of one or two parts. The device from one part has two rings. A strong cord is attached to one, and the second ring serves to slide along a line or a braided cord.

ordinary unhook

Released unhook all its mass strikes the bait and releases it from the hook. Naturally, the line must be in an upright position. If necessary, the described operation is performed several times until the bait is released.

Prefabricated traps for lures and wobblers consist of two cylinders, with a slot along the length, inserted one into the other. At the end of one cylinder is attached a ring, to which a strong cord is attached.

combined unhook

The line leading to the engaged bait is inserted into the slot. Then the inner cylinder turns in the axis and the line freely walks inside the structure, but does not exit from the slot. The principle of operation is the same as that of the previous design. The effect of disengagement is due to impact.

Lures for lures and wobblers, working on the principle of a cat, are of less weight and can be used already for shore fishing. The most elementary breakaway from this category is arranged on the principle of a ring with a slot, to which are attached several large tees, which have blunt stings.

unhook cat

The ring is attached to a strong cord. A slot is started in the slot, and the ring is sent to slide along it. After the ring reaches the bait, the tees come into play that cling to the bait tees, the bait rings. Tees on the hook should be stronger than the tees on the bait. Therefore hooks of the bait either break or unbend.

The force when pulling the bait out of the hook is created by hands and a strong cord that should not cut hands. If the triplets of the unhook do not blunt, there is a danger that they will get stuck in the snag's body. And it's good if the snags are elevated. And if not, then there will be a bait and a coup.

The next model of the detachment is the Rescuer. Such traps for lures and wobblers work on the principle of a hook with their "beak" for a swivel leash or ring wobblers.

unhook rescuer

This design is lowered along the line to the hooked lure and after the gearing for the swivel, pulls the bait with a cord. "Rescuer" can work from shore. Its only drawback is a limited area of ​​action. He is able to release the bait at medium and short distances.

Share with your friends!
(No Ratings Yet)

Leave a Reply

Your email address will not be published. Required fields are marked *

twelve − two =